What is the function of the tapered roller bearings?

Single row tapered roller bearings can withstand radial loads and axial loads in one direction. When the bearing is radially loaded, an axial force component is generated, i.e., when another bearing that can withstand an axial force in the opposite direction is required for compensation. Let us read the following words and know more about the tapered roller bearing.

• What are the possible applications for tapered roller bearings?

• What are the advantages of tapered roller bearings?

• What is the definition of tapered roller bearing?

What are the possible applications for tapered roller bearings?

Tapered roller bearings mainly bear the combined radial and axial loads mainly in the radial direction. The load-bearing capacity depends on the raceway angle of the outer ring, and the greater the angle, the greater the load-bearing capacity. This type of bearing is a dismountable bearing divided into single row, double row and four row tapered roller bearings according to the number of rolling element rows in the bearing. The bearing air of single row tapered roller bearings must be adjusted by the user during installation; The bearing air of double row and four row tapered roller bearings is factory specified according to the requirements of the user and does not need to be adjusted by the user.

What are the advantages of tapered roller bearings?

1. Tapered roller bearings have many advantages. Because the roller is conical and the cone has an angle, it can easily handle loads in different directions. It withstands axial thrust and radial loads better than pendulum, cylinder or needle bearings.

2. The geometry of tapered roller bearings allows the rollers to slide between the raceways, which means that free sliding of the rollers under load is not possible. tapered roller bearings have minimal load requirements to ensure there is no slip between the rollers and raceways. Because slip is harmful, it destroys the lubrication of the roller or raceway surfaces, resulting in worn contact surfaces and premature bearing failure.

What is the definition of tapered roller bearing?

Tapered roller bearings are radial-axial roller bearings whose rolling elements are tapered rollers. There are two types of small cone angles and large cone angles. The small cone angle mainly supports the combined radial and axial loads, mainly based on the radial load. It is often used in pairs and installed in the opposite direction. The inner and outer running rings can be installed separately, and the radial and axial spacing can be adjusted during installation and use; The large cone angle mainly supports the combined axial and radial loads, mainly based on the axial load. As a rule, it is not only used to absorb the pure axial load, but can be used in pairs (the ends of the same name are installed opposite each other) to absorb the pure radial load.

SHANDONG CHIK BEARING CO., LTD has been focusing on the development and production of tapered roller bearings for several years. And it is committed to providing perfect service to every customer from all over the world.